Air Handler Leaking Water: Causes and What to Do

Checklist graphic: safe first steps when an air handler is leaking water

Water around an indoor air handler is more than an annoyance. In a home with the unit in the attic or a closet, it can ruin a ceiling or floor quickly. Most leaks come from the condensate system, the part that removes moisture the air conditioner pulls from your air. Here is what to do, and what not to do.

Do this first

  1. Turn the system off at the thermostat, and at the breaker if water is near electrical parts. This stops more water from forming.
  2. Clean up the water. Trane says a shop vacuum is fine for large amounts of water. Do not use it on the drain line unless you are sure what you are doing.
  3. Change the air filter. A dirty filter can freeze the coil. See air filter sizes and MERV ratings.
  4. Look for ice on the coil or the refrigerant lines. If you see it, leave the system off so it melts. See why is my AC frozen.

Common causes

Trane lists these causes of an air handler dripping water:

  • A cracked, clogged or rusted condensate drain pan
  • A faulty float switch
  • A clogged drain line from dirt, debris or mold
  • Low refrigerant or a refrigerant leak
  • A newly installed unit piped so condensate does not reach the pan
  • A frozen evaporator coil caused by a dirty filter, a dirty coil or low refrigerant

Carrier names a clogged drain line, a frozen evaporator coil and a leaky or cracked drain pan among the usual suspects, and notes that the drain line should keep a continuous downward slope.

What a homeowner can do

  • Change the filter and keep a schedule.
  • Check that the drain line ends where it should and is not kinked or crushed.
  • Carrier says you can use a wet-dry vacuum at the outdoor end of the drain line, with the AC off. It warns not to do so if you are not sure which line is the condensate drain. If in doubt, call a professional.

What needs a technician

  • Diagnosing and repairing a cracked or rusted pan
  • Replacing a float or overflow switch
  • Finding a refrigerant leak and recharging the system
  • Cleaning a dirty evaporator coil
  • Fixing a drain that was installed without enough slope

Trane recommends installing an overflow switch, so the system shuts down before water can reach the floor. Bryant says a drain pan overflow switch shuts the unit off when it detects a blockage. Never bypass a safety switch to keep the system running.

Warning signs before a leak

  • Gurgling from the air handler or drain line. Bryant says this can mean trapped water.
  • Musty odors, which suggest standing water or growth. See why does my AC smell musty.
  • Water stains on the ceiling beneath an attic unit
  • Weak cooling or a frozen coil

Prevent it

Trane recommends spring and fall maintenance. A tune-up includes checking the drain, the pan and the float switch. See what a tune-up includes and why is my AC leaking water for the outdoor unit side. If water is coming from ducts, see ducts dripping water from the ceiling.

We repair air handlers and condensate systems in Roseville, Rocklin, Folsom and Elk Grove. Contact us, or see our HVAC services. Our diagnostic is a flat $69, credited toward the repair.

Frequently asked questions

Why is my air handler leaking water?

Trane lists a cracked, clogged or rusted drain pan, a faulty float switch, a clogged drain line, low refrigerant or a leak, a unit piped so condensate does not reach the pan, and a frozen evaporator coil. A dirty filter, a dirty coil or low refrigerant can freeze the coil, and the melting ice then overflows the pan.

What should I do first when I find water?

Turn the system off at the thermostat or the breaker so it stops making more water, and clean up what is there. Trane says a shop vacuum is fine for large amounts of water. Then change the filter and call for service if the leak continues.

Can I clear the condensate drain line myself?

Carrier says a wet-dry vacuum can be used at the outdoor end of the drain line with the AC turned off, but not if you are unsure which line is the condensate drain. If you are not certain, call a professional.

What does a float switch do?

A float or overflow switch shuts the system off if it detects a blockage that would cause the drain pan to overflow. Bryant describes it as a safety device. Never bypass one, because it protects your ceiling and floors.

Why is my air handler gurgling?

Bryant says gurgling can mean water is trapped in the drain line, which points to a partial clog. It is worth fixing before the pan overflows.